Metal Watch Band Tool Bracelet Swiss Link Remover Adjuster Spare Pin Repair Kit

Swiss-type metal bracelet tool with two hardened pins (0.8mm and 1mm) for removing and fitting watch strap links.

⭐ At a glance

📏 Supplied with 2 hardened pins: 0.8mm and 1mm diameter

✅ Works on metal watch bracelets and straps with removable links

📦 Complete tool kit, ready to use

✔️ New with tags, unused

🔧 What it does & how to use

This is a Swiss-style bracelet tool used by watch repairers and hobbyists to punch out the pins that hold bracelet links together, letting you shorten a metal strap, remove damaged links, or reassemble one after cleaning. It's a simple, low-cost way to resize a metal watch bracelet without needing a jeweller.

• Support the bracelet: Rest the link over the tool's cradle so the pin lines up with the guide hole.
• Choose the pin: Fit the 0.8mm or 1mm pusher pin to match the diameter of the link pin you're removing.
• Push the pin through: Turn the tool's screw mechanism steadily to drive the link pin out without bending or scratching the bracelet.
• Remove or add links: Take out unwanted links to shorten the strap, or reinsert them to lengthen it, then press the pin back through to lock the links in place.
• Check the fit: Try the bracelet on and repeat with further links until the length is right.

⚠️ Please check that one of the two supplied pin diameters (0.8mm or 1mm) matches the link pins on your bracelet before starting, as pins outside this range won't be pushed out cleanly with this tool.